Compact UV Vacuum Laminating Machine

1. 120-second UV curing cycle - from film placement to cured, ready-to-hand-over finish in two minutes.
2. 180-degree UV illumination - full-surface coverage eliminates edge shadows and uneven cure patches common in single-source UV designs.
3. Built-in vacuum chamber - negative pressure exceeds 65 KPA, pulling the film tight against curved and flat glass before curing begins.
4. One-button operation - vacuum, cure, and vent phases run automatically on a digital timer. No manual timing or guesswork.
5. Safe 395nm UV wavelength with enclosed chamber design - operator exposure is blocked throughout the cycle.

For Phone Repair Shops

After a screen replacement, the final film lamination is what the customer sees and feels. The SM-2206 vacuum chamber pulls the film flat before the UV cycle starts - no air pockets trapped under the edges, no re-dos. At 120 seconds per cycle, it keeps pace with a busy repair counter without becoming the bottleneck.

For Mall Kiosks & Retail Counters

Weighing just 1.43 kg with a footprint smaller than a sheet of A4 paper (177 x 293 mm), the SM-2206 fits next to a point-of-sale terminal. The one-button workflow means retail staff - not just technicians - can apply and cure films confidently. The enclosed design keeps the process clean and presentable for customers watching nearby.

For Mobile Technicians & On-Site Service

DC 12V input means the SM-2206 can run from a vehicle power source. Pack it in a service bag alongside film stock and a cutting machine, and you have a complete mobile screen-protection setup that fits in a backpack.

The SM-2206 laminating process runs in three automated phases. First, the vacuum pump evacuates the chamber to over 65 KPA of negative pressure, pressing the film uniformly against the device screen - curved edges included. Second, the 395nm UV LED array floods the 112.5 x 192.5 mm working area with 2000 mJ of energy over 120 seconds. Third, the vent releases pressure gradually over 5 seconds, preventing film lift from sudden decompression.

At 55 dB at 30 cm, the SM-2206 is quiet enough for a retail counter or open-plan repair shop. The 395nm wavelength is selected for efficient hydrogel and UV-glue curing without the ozone generation associated with shorter UV bands. No consumable parts - no bulbs to replace, no gaskets to swap under normal use.

Who This Machine Is For

Phone repair shops and screen protector installers doing premium UV or vacuum-sealed installations.

Most shops recover their investment within 1-2 months of daily use. Customers typically start with one unit, test it for 4-8 weeks, then return for multi-unit orders. Built in an ISO-certified factory - 1,000+ units shipped monthly, CE/RoHS/CPST/SST certified, 1-year warranty with global support.

Questions? Contact our team for a recommendation based on your market.

Hot Tags: compact uv vacuum laminating machine, China compact uv vacuum laminating machine manufacturers, suppliers, factory